Adapter retainer
Before you begin:
v Read "Important safety information" on page iii.
v Review the information in "System reliability considerations" on page 35.
To remove the adapter retainer, complete the following steps:
1. Turn off the server, if it is on.
2. Unplug the server.
3. Remove the side cover. See "Removing the side cover" on page 41.
4. Remove all adapters. See "Installing an adapter" on page 43.
5. Rotate the adapter retainer to the open position.
6. Grasp the adapter retainer and gently slide the top and bottom tabs out of the
notches.
77
FRU information (service only)