Splicecom PCS 410 User Manual page 61

4 Select the Further Numbers icon.
5 If you wish to dial the Mobile number select the Mobile button, if you wish
to dial the Home number select the Home button etc.
6 The original call will be placed on hold and the new call will be made.
7 Select the Transfer icon when ready.
For further information on transferring calls please refer to page 10.
Amending the details within a Contact
Please note: you will only be able to make a change to a Contact's details if given the required
permission. Please refer to your system administrator for further information.
1 From the Call Control toolbar select the Contacts icon.
2 Select the Contact required.
3 Select the Information icon.
4 The Contact Details for the selected Contact will be displayed. You can
amend or add information, and view and add Notes stored with this
Contact
5 Select OK to save any changes or Cancel to exit without saving the changes.
Create a new Contact
Please note: you will only be able to add a new Contact to the database if given the required
permission. Please refer to your system administrator for further information.
1 From the Call Control toolbar select the Contacts icon.
2 Select the New Contact icon.
3 A blank Contact Details form will be displayed. Enter all the information
required.
4 If you wish to add any notes to this Contact select the Note button and
enter the text required.
5 When ready, select OK to save the new Contact or Cancel to cancel the new
entry.
5 Series/V3.2/1107/2
- 57 -
- 57 -
PCS 400/410 and 50 User Manual
Contacts
Contacts
PCS 400/410 and 50 User Manual