Splicecom PCS 410 User Manual page 58

To exit from the Contacts Directory select the Exit icon or press Esc.
Transfer a Call to a Contact
1 Select the Look Up icon.
2 Select Contacts.
3 Select the Contact required.
4 Select the Dial icon or press Enter.
5 The original call will be placed on hold and the new call will be made.
6 Select the Transfer icon or press Enter when ready.
For further information on transferring calls please refer to page 10.
Add a Note to a Contact
During a call text can be entered and displayed with the call, this can be useful when a call is
transferred the information is passed on (please refer to page 13 for further information). If the
call has been made or received from a Contact this text can also be stored permanently with the
Contact for future information. This text will be displayed whenever a call is received by this
Contact.
1 Click on the Add Note icon.
2 Enter any text required in the Note box.
5 Series/V3.2/1107/2
- 54 -
- 54 -
PCS 400/410 and 50 User Manual
Contacts
Contacts
PCS 400/410 and 50 User Manual