Installation Instructions - Heta SCAN-LINE 40 Operating Instructions Manual

INSTALLATION INSTRUCTIONS

Scan-Line 40 and 50
Please read carefully before installing
the stove. NB! Before assembling the
soapstones, ensure that the underlay/
floor is level and that the distance
from the floor to the top plate is 1030
mm. The stove must be in level. To ad-
just, turn the adjusting screws on the
base up/down.
We recommend installation of the
soapstones is carried out by two
people.
A standard set of brackets and pins
are provided for installation of the
soapstones. Refer to the overview
on page 10 and 20 to see how many
brackets/pins are required.
If required, lubricate the pin holes
with a small amount of silicon. Can
also be applied between the stones.
Fig. 1
9