Erasing A Feature Button - Nortel Enterprise Edge Feature Programming Telephone Manual

Erasing a feature button

1. Press
ƒ•⁄
2. Press the feature button.
3. Press
˙
Displays
<Feature name>
SHOW
Enter code:
F__
QUIT CLEAR
Feature code:
QUIT
Feature moved
Press a button
EXIT
Program and HOLD
Program and OK
QUIT
For other displays, see
P0908510 Issue 01
.
or OK to erase the button.
The name of the feature assigned to a button is
displayed when you press the button.
OK
when there is more information available. Press
SHOW for additional information.
If you are checking a speed dial button, enter the
two-digit speed dial code that you want to check.
Enter the feature code, or press
programming or CLEAR
entered. The system accepts the entry as soon as you
enter a valid feature code.
Press and enter the feature code you want
ƒ
to assign to the button. You cannot enter invalid codes.
You have programmed a button with a feature that was
already programmed onto another button. The feature
has moved to the button you just programmed. Its
original button is now blank.
Press the button you want to check. Press
or when you are finished.
EXIT
Enter the number you want to program and press
. To erase the button, just press
˙
.
˙
Enter the number you want to program and press
To erase the button, just press
OK
Common feature displays
Enterprise Edge Feature Programming Telephone Guide
Customizing your telephone 91
SHOW appears
£
or to quit
® QUIT
to clear the numbers you have
ƒ
or OK .
˙
on page 149.
or
OK .