Using Camp-On - Nortel Enterprise Edge Feature Programming Telephone Manual

Restricted call
CANCL RETRY
Still in trnsfer
CANCL RETRY
Transfer denied
CANCL RETRY
Transfer to:2___
CANCL RETRY
For other displays, see

Using Camp-on

ƒ°¤
You can transfer an external call to another telephone, even if all of its lines are
busy.
1. Press
ƒ°¤
2. Dial the number of the telephone to which you want to camp the call.
Camped calls appear on a line button on the receiving telephone, if one is available.
If there is no line button available, you receive a message on the display and hear
Camp tones.
Each Enterprise Edge telephone can handle only one camped call at a time.
Displays
221 Camp max
CALLBACK
221 DND
CALLBACK
Camp denied
Camp to:
CANCL
P0908510 Issue 01
You cannot transfer the call because of telephone or line
restrictions.
Complete the transfer in progress before you access a new
feature, answer another alerting call or select an outgoing
line.
Your transfer cannot be completed for one of these
reasons:
All the resources needed to perform a transfer are in use.
Try again later.
You have tried to transfer an external call to another
external party. Some restrictions apply.
You cannot transfer your conference call.
Press RETRY if you entered the wrong internal number or if
the person to whom you are transferring the call is
unavailable.
Common feature displays on page 149.
.
You tried to camp a call to a telephone that already has a
camped call. The call has come back to you. Press the
button or the line button to reconnect to the call.
CALLBACK
On the M7100 telephone, just pick up the receiver.
The person to whom you redirected a call has Do Not
Disturb active on the telephone. The call has come back to
you. Press the CALLBACK
reconnect to the call. On the M7100 telephone, just pick up
the receiver.
You have tried to camp an internal call. You can only camp
external calls.
Dial the number of the internal telephone to which the call
is sent.
Enterprise Edge Feature Programming Telephone Guide
Transferring calls 61
button or the line button to