Overriding Call Forward; Changing The Automatic Call Forward Settings For A Telephone; Changing Forward No Answer; Changing The Delay Before A Call Is Forwarded - Nortel Enterprise Edge Feature Programming Telephone Manual

66 Forwarding your calls

Overriding Call Forward

If you call someone who has their calls forwarded to you, your call rings at that
person's telephone even though they are forwarding their calls to you.

Changing the automatic Call Forward settings for a telephone

Call forwarding can be programmed to forward a call when it is not answered or the
line is busy. You can also define the number of times the telephone rings before
forwarding takes place. These features must be programmed by starting a Unified
Manager session.

Changing Forward no answer

Forward no answer redirects unanswered calls to another telephone on your
Enterprise Edge system.
Line Redirection takes precedence over Forward no answer.
For step-by-step instructions for changing Forward no answer see
to Call Forward No Answer

Changing the delay before a call is forwarded

You can assign the number of times that the incoming call rings at your telephone
before the call is forwarded. To estimate the delay time in seconds, multiply the
number of rings by six.
For step-by-step instructions, see
before it is forwarded
Enterprise Edge Feature Programming Telephone Guide
Tip
If the Enterprise Edge set is a member of a Hunt Group, the Call Forward no
answer feature is overridden and the Hunt Group call continues to ring until
the hunt time has expired. For more information on Hunt Groups see
Programming Hunt Groups
on page 25.
Change the number of times the telephone rings
on page 26.
on page 101.
Making changes
P0908510 Issue 01