Independently Holding Two Calls; Putting A Conference On Hold - Nortel Enterprise Edge Feature Programming Telephone Manual

38 Answering calls
2. Press . The call is disconnected.
®
3. Press the line button of the held call to speak to the remaining person.
On a M7100 telephone:
1. Press
ƒ£‹
the caller you want to keep on hold.
2. Press . The call is disconnected.
®
3. Press
˙

Independently holding two calls

For all Enterprise Edge telephones except the M7100 telephone, you can put the two
people in a conference call on hold independently so that they cannot talk to each
other.
1. Press the line button of one person. The other person is automatically put on
hold.
2. Press
˙
You can re-establish the conference.
3. Take one call off hold.
4. Press
ƒ‹
5. Take the other call off hold.

Putting a conference on hold

You can put a conference on hold, allowing the other two people to continue
speaking to each other by pressing
You can reconnect to the conference by pressing either of the held line buttons. For
the M7100 telephone, press
Splitting a conference
You can talk with one person while the other person is on hold.
On a M7208, M7310 or M7324 telephone
• Press the line button of the person to whom you want to speak. The other person
is automatically put on hold.
On a M7100 telephone:
Enterprise Edge Feature Programming Telephone Guide
, to place one caller on hold. Press
to speak to the remaining party.
. The second person is put on hold.
.
˙
.
˙
˙
.
P0908510 Issue 01
again, to put