Direct-dial calls to a direct-dial telephone ring at the extra-dial telephone (the extra-
dial telephone is designated by your installer) only when you enter the Ringing
service feature code (
the extra-dial telephone is activated, not the actual Ringing service (unless that
direct-dial telephone is a control telephone).
User passwords
User passwords prevent unauthorized or unintentional changes to your Enterprise
Edge system. There are two types of user password: Registration and Call Log.
Registration password
The Registration password is used to control the registration of Companion
portables to the Enterprise Edge system. See the chapter
page 135 for more information.
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear it in
programming. The individual can then enter a new password from his or her
telephone.
You need to start a Unified Manager session to program this feature. See
Started
on page 13 for more information.
1. Select Passwords, Call Log pswds.
2. Double-click the DN number.
3. Enter a new Call Log password and press Return.
Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single digit. The direct-dial
telephone is usually in a central location, such as a attendant's desk. You can have
up to five direct-dial telephones for your Enterprise Edge system. It is usually the
prime telephone or the central answering position (CAP).
The direct-dial telephone can send up to 30 messages and can invoke Services to
activate the extra-dial telephone.
P0908510 Issue 01
ƒ°‡⁄
Tip
Enterprise Edge provides six service schedules named Night, Lunch, Evening,
Sched 4, Sched 5, and Sched 6. Your installer can change these names to suit
your business.
Enterprise Edge Feature Programming Telephone Guide
Using System features 121
) at that direct-dial telephone. Note that only
Companion Features
on
Getting
Need help?
Do you have a question about the Enterprise Edge Feature Programming Telephone and is the answer not in the manual?