Table of Contents
Advertisement
•
The Delete dialog box opens
2
Click Yes.
Highlighting STGs and VLANs in the Optivity Switch
Manager contents pane
Optivity Switch Manager provides dynamic discovery of active STG devices in a
network. From Optivity Switch Manager, you can view the following
information:
•
Which ports in the network are configured as unassigned, tagging, or isolated
routing ports (IRPs) and brouter ports
•
Which ports are assigned to a particular spanning tree group (STG)
•
Which device is the root of an STG, and which ports are in the forwarding and
blocking states.
•
Which ports are members of a VLAN or multiple VLANs.
Viewing VLAN members in Optivity Switch Manager
To view the members of a VLAN in Optivity Switch Manager:
1
In the navigation pane, choose a VLAN.
The Ports table opens in the VLAN Manager contents pane.
2
From the VLAN Manager menu bar, choose View > Highlight Topology.
3
Return to the Optivity Switch Manager window.
The highlighted topology view opens in the Optivity Switch Manager
contents pane.
Figure 37
VLAN-209.
On the VLAN Manager toolbar, click Delete.
shows that 10.10.40.170 and 10.10.40.235 are members of
Chapter 4 Using VLAN Manager
(Figure 31 on page
82).
Using Optivity Switch Manager, Release 1.1.0.0
93
Advertisement
Table of Contents
