Viewing Isolated Devices - Nortel Optivity Switch Using Manual

Table 32 No Trunk table fields (continued)
Fields
PortMembers
PortType
VlanIds
Enable
IfIndex

Viewing isolated devices

Isolated devices have one or more connections to a hub or bus, but are not
connected to another switch.
To view the isolated devices:
In the MultiLink Trunking Manager navigation pane, select an isolated
device.
The Isolated Device table opens in the contents pane
Chapter 5 Using MultiLink Trunking Manager
Description
Ports that are assigned to the MLT.
Type of port on the MLT (access or trunk).
VLAN(s) to which the ports belong.
Whether the MLT is enabled (true) or disabled (false).
Interface index, a number from 96 to 4097, that identifies the MLT to
the software.
Using Optivity Switch Manager, Release 1.1.0.0
109
(Figure 45).