Table of Contents
Advertisement
Arranging devices on the topology map
As Optivity Switch Manager discovers devices, they are arranged by default in a
column (top to bottom/left to right) on the topology map.
Optivity Switch Manager contents pane after a seed address was located. The
devices icons are crowded together, and the port numbers and IP addresses
overlap each other. To improve readability of the map, you can
manually adjust
Figure 10 Optivity Switch Manager display before Layout command
To automatically arrange the topology map:
Do one of the following:
•
From the Optivity Switch Manager menu bar, choose Actions > Layout
Map.
•
On the Optivity Switch Manager toolbar, click Layout Map.
The nodes are automatically arranged on the map. You may also need to
manually adjust nodes on the map until you have the desired layout.
Chapter 2 Using Optivity Switch Manager
the layout.
Using Optivity Switch Manager, Release 1.1.0.0
Figure 10
shows the
automatically or
45
Advertisement
Table of Contents
