Viewing Multicast Groups Information - Nortel Optivity Switch Using Manual

Release 1.1.0.0
Table of Contents

Advertisement

156
Chapter 6 Using Multicast Manager
Table 52 Route tab (MRoute) fields (continued)
Field
Interface
ExpiryTime
Protocol

Viewing Multicast Groups information

Multicast Group information contains details about multicast groups with active
members, including their multicast group address, source subnet, and last reporter.
To view Multicast Group information:
The Multicast Group table opens with the Source Subnets tab displayed in the
contents pane
208963-B
Select a multicast address listed under the Multicast Groups icon.
(Figure
Description
DVMRP interface slot/port number or VLAN ID on which IP
datagrams sent by these sources to this multicast address
are received.
Amount of time remaining before this entry is aged out. The
value 0 indicates that the entry is not subject to aging.
Routing protocol through which this route was learned.
Currently only DVMRP is supported.
75).

Advertisement

Table of Contents
loading

Table of Contents