Figure 46 Insert Mlt Dialog Box - One Device Selected; Table 34 Insert Mlt Dialog Box Items For A Single Device - Nortel Optivity Switch Using Manual

112 Chapter 5 Using MultiLink Trunking Manager
Figure 46 Insert MLT dialog box — one device selected
Table 34

Table 34 Insert MLT dialog box items for a single device

Item
Node
Id
Name
Ports
Type
VlanIds
3 In the Id text box, select the Id number for the MLT.
4 In the Name text box, type the name of the MLT.
5
In the Ports box, select the ports to be added to the MLT.
Inactive ports appear dimmed in the Ports box.
208963-B
describes the items in the Insert MLT dialog box.
Description
IP address of the first network device configured on the MLT.
Unique identifier for the MLT, which is automatically assigned by
MultiLink Trunking Manager.
User-defined name of the node on the MLT.
Ports enabled on the MLT.
One of the following types of MLT:
• Access
• Trunk
The default is Access.
VLAN IDs found on the device.