Uploading The Syslog File; Figure 82 Telnet Window - Nortel Optivity Switch Using Manual

Figure 82 Telnet window

************************************
* Nortel Networks, Inc.
* Copyright (c) 1996-2000
* All Rights Reserved
* Passport 8010
* Software Release _B047
************************************
Login:
4
To begin the Telnet session, enter your login name and password, for
example:
Login: rwa
Password: *** (rwa)
When you have accessed the CLI, you use the

Uploading the syslog file

To use the copy command to upload a file:
Enter:
copy <srcfile> <destfile>
where:
is the file name or number of the source file in flash, pcmcia,
srcfile
config, nvram, tftp, or trace.
is the file name and path, including the IP address of the
destfile
management station.
For example, the following command copies a syslog file to the management
station located at IP address 10.170.137.105:
copy /pcmcia/syslog.txt 10.170.137.105:syslog.txt
Chapter 7 Using Log Manager
*
*
*
*
*
command to
copy
Using Optivity Switch Manager, Release 1.1.0.0
169
upload the file.