Table of Contents
Advertisement
90
Chapter 4 Using VLAN Manager
Refer to the section on user-defined protocols in Networking Concepts for the
Passport 1000 Series Routing Switch Release 2.0 and Networking Concepts for
the Passport 8000 Series Routing Switch for more information about this topic or
to see the actual values and how they are assigned.
The following PIDs are not valid:
•
PID0x0000 through 0x05dc: overlap with the 802.3 frame length
•
PIDs of predefined protocols (for example, IP, IPX, AppleTalk)
•
PID 0x8100: reserved by 802.1Q to identify tagged frames
•
PID0x9000: used by the diagnostic loopback frames
•
PID0x8808: used by 802.3x pause frames
•
PID0x4242: overlaps with the BPDU DSAP/SSAP
Creating a source MAC address-based VLAN
To create a source MAC address-based VLAN:
1
In the navigation pane, select an STG.
2
Do one of the following:
•
•
The New VLAN dialog box opens
208963-B
From the menu bar, choose Edit > Insert.
On the VLAN Manager toolbar, click Insert.
(Figure
35).
Advertisement
Table of Contents
