Table of Contents
Advertisement
3.8. BURNER SURROUND INSTALLATION
You can choose to install a platform with crushed glass or imitation logs around the burner.
It is mandatory to install either the platform or imitation logs around the burner to maintain the
appropriate volume of the combustion chamber. Do not leave the space around the burner empty.
3.8.1. IMITATION LOG INSTALLATION
Four log pieces are required to completely surround the burner (each one surrounds a corner of the
burner). If you have a recessed fireplace, two pieces will be enough (they will be installed in front of the
burner.) If you use four log pieces, start at the back. The large log goes on the left back corner and the
small one lines up on the right back corner of burner. Then install the other large log in front of the burner;
on the longer side, there is a clearance space to surround the pilot. The large log goes on the front right
corner of the burner. Finish installation by inserting the small log on the front left corner of burner, lining it
up with the large log (figures 3.8.a and 3.8.b). Finally, spread 3 cups of glass around the logs.
47
WARNING
Advertisement
Table of Contents
