Wall Switch Installation & Operation; Wiring; Operation With Wall Switch - J. A. Roby loo RGR-25 Installation And Operation Manual

7.3. WALL SWITCH INSTALLATION & OPERATION

7.3.1. WIRING

You can put the Main Switch of the
smart case and wire it to the wall switch. (It's only a signal running into wire (DON'T use any POWER
SOURCE or you can permanently damage the

7.3.2. OPERATION WITH WALL SWITCH

To use fireplace without remote you have to:

Set the 3 positions switch to the left position
(ON).

Use the wall switch to turn on and turn off the
fireplace.
SmartCase
N.B. The
auto extinguish. To ignite again simply turn off the
wall switch and turn it on again.
To use fireplace with remote and wall switch you
have to:

Set the three position switch to centered
position (remote)

Keep the wall switch on and operate the fireplace with the remote.
N.B. The wall switch now control the pilot and main power of the
SmartCase
®
The have an automatic 24 hours auto extinguish. To ignite again simply push power button on
the remote.
60
SmartCase
®
have an automatic 24 hours
®
into a wall switch by disconnecting the main switch of the
SmartCase
®
)
SmartCase
.
Like the bypassed main switch.