3.1.6. SHELF SIZE
A shelf may be installed above the fireplace as long as it complies with the authorized dimensions. Non-
compliance could result in a fire.
Figure 3.1.5.a
3.2. VENT INSTALLATION
3.2.1. INSTALLATION PRECAUTIONS
•
The installer must make sure to read and understand section 1.2.1 of this manual regarding
installation instructions.
•
This appliance must be installed in combination with a ventilation system approved by J. A. ROBY.
Consult local building codes before starting the installation.
•
The installer must use a vent configuration adapted to the installation.
Before installing the vent, the installer must read this fireplace's and the vent kit's manuals.
•
Vents should only be installed by a qualified installer/technician. This person must comply with the
following safety rules:
•
Wear gloves and safety glasses for his own protection.
•
Be very careful when working on a roof or with ladders.
•
Find where electrical wires are located in walls and ceiling.
The following actions will void your vent system's warranty:
•
Installation of any damaged vent system component.
•
Unauthorized modification of the vent system.
•
Installation that differs in any way from the one specified in section 3.2, INSTALLATION OF THE
VENT.
•
Installation of any component not manufactured or approved by J. A. ROBY.
34
SHELF SIZE (IN.)
Distance from the
Authorized shelf
top of the fireplace
depth
0
1
2
3
4
5
6
7
Figure 3.1.5.b
2
3
4
5
6
7
8
9