Setting System Properties; Setting The Time And Date - Strong SRT 5020X User Manual

8. When you have finished configuring the TV settings, press OK.
The Configuration menu re-appears. You can continue with other set-up tasks (see below), or
press EXIT to return to TV viewing.

Setting system properties

1. Press MENU on the remote control. The Digital TV menu appears.
2. Press OK. The first item in the sub-menu—Channel Manager—is highlighted.
3. Press CH▼ until Configuration is highlighted, and then press OK. The Configuration menu
appears.
4. Press CH▼ until System Setup is highlighted, and then press OK. The System Setup window
appears.
On this screen you can control the following settings:
• Equaliser settings
• Surround Sound type
• Active antenna (that is, if an antenna
booster is installed that needs power; the
necessary)
5. Select an option you want to change. If necessary, press CH▼ or CH▲ until the option is
highlighted.
6. With the option you want to change highlighted, press VOL
allowable values (shown in the panel at the right of the screen). Stop when the value you want
is displayed.
7. If there is another system set up option you want to change, repeat this procedure from step 5.
8. When you have finished configuring the system, press OK.
The Configuration menu re-appears. You can continue with other set-up tasks (see below), or
press EXIT to return to TV viewing.

Setting the time and date

1. Press MENU on the remote control. The Digital TV menu appears.
2. Press OK. The first item in the sub-menu—Channel Manager—is highlighted.
3. Press CH▼ until Configuration is highlighted, and then press OK. The Configuration menu
appears.
can supply the power, if
• JPEG effect: to set the way
JPEG photos are displayed
• LCN (Logical Channel
Numbering)
• Area (that is, your country)
or VOL
17
to step through the