Setting The Time - Strong SRT 5024 User Manual

Setting the time

The time is set for you automatically once you have scanned and detected digital stations. If you
find that the time is not correct, you can change it as follows:
1. If the Main Menu is not displayed, press MENU on the remote control.
2. If the Config option is not highlighted, press VOL
3. If Set Time is not highlighted in the Config menu, press CH ▼or CH ▲ on the remote control until
it is.
4. Press OK on the remote control.
The Set Time window appears.
5. To change the Summer Time setting, make sure the option is highlighted (press CH ▼or CH ▲
until it is) and then press VOL
6. If the GMT usage option is ON, the time is being set for you automatically. If this option is on and
the time shown is wrong, turn the GMT usage option to OFF. (Press CH ▼or CH ▲ until the option
is highlighted and then press VOL
When you turn the GMT usage option off, Set Date and Set Time options appear. You can now
select these options (by pressing CH ▼).
7. To change the date, highlight the Set Date option and press OK. A calendar appears. Press CH
▼or CH ▲ or VOL
that you change the month by pressing the page up or page down buttons on the remote
control.)
8. To change the time, highlight the Set Time option. Note that the first digit of the time shown is
underlined. Using the number keys on the remote control, enter the correct number for this digit.
The next digit of the time is highlighted. Enter the correct number for this digit. Continue until you
have set all the digits of the time.
9. When you have finished making your changes, press the SUB button (the red button) on the
remote control to save your settings (or press the AUDIO button (the green button) to save your
settings and return to the Config menu.
10. Press MENU or EXIT to return to normal viewing.
or VOL
or VOL
or VOL until the correct date is highlighted, and then press OK. (Note
or VOL on the remote control until it is.
.
.)
14