Table of Contents
Advertisement
82 Managing Users and Groups
4
5
6
Copyright © 2007-2008 Nortel Networks
.
>> User# add
Name of user to add: cert_admin (maximum 255 characters,
no spaces)
Assign the new user to a user group.
You can only assign a user to a group in which you yourself are
a member. When this criteria is met, users can be assigned to
one or more of the following groups:
•
oper
•
admin
•
certadmin
•
tunnelguard
By default, the admin user is a member of all preceding groups,
and can therefore assign a new or existing user to any of these
groups. The group assignment of a user dictates the user rights
and access levels to the system.
>> User# edit cert_admin
>> User cert_admin# groups/add
Enter group name: certadmin
Verify and apply the group assignment.
When typing the list command, the current and pending group
assignment of the user being edited is listed by index number
and group name. Because the cert_admin user is a new user,
the current group assignment listed by Old: is empty.
>> Groups# list
Old:
Pending:
1: certadmin
>> Groups# apply
Changes applied successfully.
Define a login password for the user.
When the user logs in to the NVG cluster the first time, the user
will be prompted for the password you define in this step. When
successfully logged in, the user can change his or her own
password. The login password is case sensitive and can contain
spaces.
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Advertisement
Table of Contents
