Table of Contents
Advertisement
2
3
Activating the Software Upgrade Package
The VPN Gateway can hold up to two software versions simultaneously.
To view the current software status, use the /boot/software/cur
command. When a new version of the software is downloaded to the
VPN Gateway, the software package is decompressed automatically and
marked as unpacked. After you activate the unpacked software version
(which may cause the VPN Gateway to reboot), the software version
is marked as permanent. The software version previously marked as
permanent will then be marked as old.
Copyright © 2007-2008 Nortel Networks
.
Enter the host name or IP address of the server.
Enter hostname or IP address of server: <server host
name or IP>
Enter the file name of the software upgrade package to
download.
If needed, the file name can be prefixed with a search path to the
directory on the FTP/SCP/SFTP server.
If you are using anonymous mode when downloading the
software package from an FTP server, the following string is
used as the password (for logging purposes):
admin@hostname/IP.isd.
Enter filename on server: <filename.pkg>
FTP User (anonymous): <username or press ENTER for
anonymous mode>
Password: <password or press ENTER for default
password in anonymous mode>
Received 28200364 bytes in 4.0 seconds
Unpacking...
ok
>> Software Management#
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
Activating the Software Upgrade Package 75
--End--
Advertisement
Table of Contents
