Nortel Vpn Gateway; User Guide - Nortel NN46120-104 User Manual

4
Using TFTP/FTP/SCP/SFTP to add Certificates and Keys
The following is an example of how to input a certificate into the VPN
Gateway using TFTP, FTP, SCP, or SFTP.
Copyright © 2007-2008 Nortel Networks
.
Using TFTP/FTP/SCP/SFTP to add Certificates and Keys 103
Apply your changes.
>> Certificate 1# apply
Changes applied successfully.
Your certificate and private key is now fully installed and ready to
be taken into use.
If the NVG software is used for SSL acceleration purposes, the
certificate should be mapped to the virtual SSL server, using the
/cfg/ssl/server #/ssl/cert command.
If the NVG software is used for deployment of a VPN solution,
the certificate should be mapped to the portal server of the
desired VPN, using the /cfg/vpn #/server/ssl /cert
command.
To view basic information about configured certificates, use the
/cfg/cur cert command.

Nortel VPN Gateway

User Guide

NN46120-104 02.01 Standard
14 April 2008
--End--