Nortel NN46120-104 User Manual page 48

48 Initial Setup
4
Copyright © 2007-2008 Nortel Networks
.
•
VPN Portal IP address. Used by remote users to connect to
the VPN.
•
DNS search list. Enables use of short names on the
Portal, for example, inside to connect the server
inside.example.com.
•
HTTP to HTTPS redirection. Automatically redirects requests
made with HTTP to the proper HTTPS server configured for
the VPN, for example, http://vpn.example.com gets
redirected to https://vpn.example.com.
To view all settings created by the VPN quick setup wizard, see
"Settings Created by the VPN Quick Setup Wizard" (page
To configure IPsec access in your VPN, run the IPsec quick
setup wizard.
With IPsec access enabled, remote users can access the VPN
through a secure IPsec tunnel using the Nortel IPsec VPN client
(formerly Contivity).
Setup IPsec [no]: yes
Creating default IKE profile under ipsec/ikeprof 1
Creating default user tunnel profile under
ipsec/utunprof 1
Configuring IPsec Group login under aaa/group
trusted/ipsec
Do you want to use IPsec Group login [no]: yes
Enter IPsec secret: secret
Enter Lower IP address in pool range: 10.10.10.1Pub
_newline ?> Enter Upper IP address in pool range:
10.10.20.99
Enter Network mask for the pool range: [255.255.255.0]
: 16
Creating IP pool 1
Nortel VPN Gateway
User Guide
NN46120-104 02.01 Standard
14 April 2008
49).