Snmp Forms - Nortel 5100 Series Release 2.3.3 User Manual

Nortel Switched Firewall Browser-Based Interface Users Guide

SNMP forms

Use the Administration/SNMP forms to enable or disable SNMP event and alarm messages,
enter administrative information for the SNMP system, list configured trap hosts, administer
USM users, and configure the source IP address used with SNMP traps.
Administration/SNMP provides the following forms:
General (see Administration/SNMP/General form)
System (see
Trap Hosts (see
USM Users (see
MIBs (see
Advanced (see
Administration/SNMP/General form
Use the Administration/SNMP/General form to enable or disable SNMP event and alarm
messages for the Firewall (see
Figure 93 Administration/SNMP/General form
The Administration/SNMP/General form is divided into three sections:
SNMP Settings
SNMPv1/v2c Options
126 Browser-Based Interface forms reference
Administration/SNMP/System form on page
Administration/SNMP/Trap Hosts form on page
Administration/SNMP/USM Users form on page
Administration/SNMP/MIBs form on page
Administration/SNMP/Advanced form on page
Administration/SNMP/General
128)
129)
131)
133)
134)
form).
216383-D October 2005