Vrrp Form - Nortel 5100 Series Release 2.3.3 User Manual

Nortel Switched Firewall Browser-Based Interface Users Guide
VRRP Settings

VRRP form

Use the Network/VRRP form to view and configure the VRRP parameters for the cluster (see
Network/VRRP form).
Figure 53 Network/VRRP form
Fields and buttons on the Network/VRRP form are as follows:
High Availability (also called active-standby) provides a list with the following two
selections:
80 Browser-Based Interface forms reference
Ports specifies the port number associated with the bridge ID.
Vrid provides a list to select the numerical ID, between 1 and 255, for the virtual
router on the bridge.
Ip1 provides an entry field to specify virtual IP address #1 for the interface.
Ip2 provides an entry field to specify virtual IP address #2 for the interface (applied
for VRRP Active-Active).
Update submits the changes to the pending configuration.
Back returns to the Network/Bridges form without submitting changes to the pending
configuration.
Disabled indicates that high availability VRRP is disabled.
216383-D October 2005