Audit Form - Nortel 5100 Series Release 2.3.3 User Manual

Nortel Switched Firewall Browser-Based Interface Users Guide
Update submits the UPS Monitor changes to the pending configuration.

Audit form

Use the Administration/Audit form to configure a RADIUS server to receive log messages
about commands executed in the CLI (see Administration/Audit form).
Figure 108 Administration/Audit form
The Administration/Audit form is divided into the following two sections:
General
RADIUS Servers
Fields and buttons on the form are as follows:
General
142 Browser-Based Interface forms reference
Status provides a list with the following selections:
o Enabled permits the CLI login, logout, and update events to be sent to the event
log, any configured syslog servers, and to a RADIUS audit server.
o Disabled disables auditing.
Vendor Id provides an entry field to specify the SMI Network Management Private
Enterprise Code. TIP: The default is 1872, Alteon (NSF).
Vendor Type provides an entry field to specify a number representing the vendor type
attribute used in RADIUS. TIP: The default vendor type value is 2.
Update submits the changes to the pending configuration.
216383-D October 2005