Nortel Switched Firewall Browser-Based Interface Users Guide
Network/DHCP Relay/Servers form
Use the Network/DHCP Relay/Servers form to display and modify the information about the
DHCP Relay Servers (see Network/DHCP Relay/Servers form).
Figure 46 Network/DHCP Relay/Servers form
Fields and buttons on the Network/DHCP Relay/Servers form, when DHCP servers are
configured, are as follows:
Id provides the internal ID of the DHCP server.
Enabled
IP Address specifies the IP address of the DHCP server.
VRRP Group specifies the affinity to VRRP Group in active-active mode.
Actions provides the following two options:
Add New Server (see
72
Browser-Based Interface forms reference
Yes indicates that the DHCP server is enabled.
No indicates that the DHCP server is disabled.
Modify provides a form to modify the server information.
Delete deletes the selected server.
Network/DHCP Relay/Servers Add New Server form on page
73).
216383-D October 2005