Gre Tunnels Form - Nortel 5100 Series Release 2.3.3 User Manual

Nortel Switched Firewall Browser-Based Interface Users Guide

GRE Tunnels form

Use the Network/GRE Tunnels form to view and modify GRE Tunnels settings (see
Network/GRE Tunnels form).
Figure 54 Network/GRE Tunnels form
Fields and buttons on the Network/GRE Tunnels form are as follows:
Id specifies the numerical ID for the GRE tunnel in a range between 1 and 5.
Name specifies the name given to the GRE tunnel.
Enabled provides the status of the GRE tunnel.
Physical Interface specifies the physical interface number for the GRE tunnel in a range
between 1 and 255.
Remote Addr specifies the remote IP address for the GRE tunnel.
Host 1 Tunnel provides the tunnel source IP address, destination IP address, and IP Mask
specified for host 1.
Host 2 Tunnel provides the tunnel source IP address, destination IP address, and IP Mask
specified for host 2. TIP: Configure host 2 when VRRP HA or Active-Active is activated.
82 Browser-Based Interface forms reference
216383-D October 2005