Nortel 5100 Series Release 2.3.3 User Manual page 73

Network/DHCP Relay/Servers Add New Server form
Use the Network/DHCP Relay/Servers Add New Server form to add a new DHCP server.
Figure 47 Network/DHCP Relay/Servers Add New Server form
Fields and buttons on the Network/DHCP Relay/Servers Add New Server form are as follows:
Identifier provides a numerical list with a range from 1 to 8 to specify the internal ID of
the DHCP server.
Status provides a list with the following two selections:
IP Address provides a field to specify the IP address of the DHCP server.
VRRPG provides a numerical list with a choice of 1 or 2 to specify the affinity to VRRP
Group in active-active mode.
Update submits the changes to the pending configuration.
Back returns to the Network/DHCP Relay Servers form without submitting changes to the
pending configuration.
216383-D October 2005
Nortel Switched Firewall Browser-Based Interface Users Guide
Enabled enables the user of DHCP services.
Disabled disables the user of DHCP services.
Browser-Based Interface forms reference 73