Bridges Form - Nortel 5100 Series Release 2.3.3 User Manual

Nortel Switched Firewall Browser-Based Interface Users Guide
Update submits the changes to the pending configuration.
Back returns to the Network/Interfaces form without submitting changes to the pending
configuration.

Bridges form

Use the Network Bridges form to view and configure settings for bridges (see
Network/Bridges form).
Figure 51 Network/Bridges form
Fields and buttons on the Network/Bridges form are as follows:
Id specifies the numerical ID, between 1 and 25, for the bridge.
Enabled displays the bridge operational status as Yes or No.
Address1 specifies the address #1 of the bridge.
Address2 specifies the address #2 of the bridge.
Vlan Id specifies the numerical ID, between 0 and 4094, for the VLAN.
Ports specifies the port number associated with the bridge ID.
Ageing Time specifies the bridge ageing time in seconds.
78 Browser-Based Interface forms reference
Ip2 provides an entry field to specify the second virtual IP address for the interface
(applied for VRRP Active-Active).
Vrid provides a list to select a numerical ID, between 1 and 255, for the virtual router.
216383-D October 2005