Add New Interface adds a new interface to the configuration (see
New Interface form on page
Network/Interfaces Modify form
Use the Network/Interfaces Modify form to modify interfaces.
Figure 49 Network/Interfaces Modify form
Fields and buttons on the Network/Interfaces Modify form are as follows:
General Settings
216383-D October 2005
Nortel Switched Firewall Browser-Based Interface Users Guide
Modify (only visible if interfaces are present) is used to modify a displayed interface
(see
Network/Interfaces Modify form on page
Delete (only visible if interfaces are present) is used to delete an interface from the
system.
Identifier provides a list to select a numerical ID, between 1 and 255, for the interface.
Status provides a list to enable or disable the interface operation.
Management provides a list to enable or disable management through the interface.
IP Address 1 provides an entry field to specify the IP address for the interface of the
Firewall host 1.
IP Address 2 provides an entry field to specify the IP address for the interface of the
Firewall host 2.
75).
77).
Browser-Based Interface forms reference
Network/Interfaces Add
75