Nortel 5100 Series Release 2.3.3 User Manual page 83

Actions provides the following two options:
Add New GRE Tunnel (see Network/GRE Tunnels Add New GRE Tunnel form).
Network/GRE Tunnels Add new GRE Tunnel form
Use the Network/GRE Tunnels Add New GRE Tunnel form to add a new GRE tunnel to the
configuration.
Figure 55 Network/GRE Tunnels Add New GRE Tunnel form
Fields and buttons on the Network/GRE Tunnels Add new GRE Tunnel form are as follows:
Add GRE Tunnel
216383-D October 2005
Nortel Switched Firewall Browser-Based Interface Users Guide
Delete deletes the selected GRE tunnel.
Modify provides a form to modify the settings for the selected GRE tunnel.
Identifier provides a list to specify the numerical ID, between 1 and 5, for the GRE
tunnel.
Name provides an entry field to specify the GRE tunnel name.
Status provides a list containing two selections:
o Disabled
o Enabled
Physical Interface provides a list to specify a numerical value between 1 and 255.
Remote Address provides an entry field to specify the remote IP address of the GRE
tunnel.
Browser-Based Interface forms reference 83