Table of Contents
Advertisement
Command
&P6=n
\Qn
&Cn
&Dn
&Rn
&Sn
@N1=n
@Q
@Sn
P0873832 Issue 05
Description
serial interface stop
bits per character
serial interface
flow control
DCD operation
DTR operation
CTS operation
DSR operation
calling line ID
delivery control
calling line ID query
select CLID security mode
AT commands 69
Value
0 one stop bit (default)
1 one and one-half stop
bits
2 two stop bits
0 none
1 bidirectional
XON/XOFF
2 not supported
3 bidirectional RTS/CTS
(default)
4 not supported
0 always on
1 tracks connection
(default)
2 always on, except
temporarily
after disconnect
0 ignored (default)
1 enter command state
2 hang-up and disable
auto while DTR is down
3 hang-up and reset port
0 CTS follows RTS
1 CTS is always on when
on-line (default)
0 DSR is always on
(default)
0 disabled (default)
1 enable concatenation
format
2 enable tag and value
format
0 disabled (default)
1 enable CLID screening
mode
2 enable CLID blocking
mode
CTA 500 dm On Line Guide
Advertisement
Table of Contents
