Nortel CTA 500dm Installation Manual page 64

64 AT commands
Caller ID security commands summary
Caller ID Security Mode Selection
Result Codes
Add Number
CTA 500 dm On Line Guide
Command Description
@Sn select CLID security mode
@A=n add specified number to
CLID security list
@D=n remove specified number
from CLID security list
@C clear all stored numbers
&V4 display stored numbers
The Caller ID Security Mode Selection Command
allows enabling of either CLID screening or blocking, or to
disabling of Caller ID security altogether.
Value Use
0 disable Caller ID security (default)
1 enable CLID screening
2 enable CLID blocking
OK Appears when the value is understood and calling line ID is
supported.
ERROR Appears when the selected value is not recognized or is not
supported.
The Add Number Command
Value
0 disabled (default)
1 enable CLID screening mode
2 enable CLID blocking mode
@Svalue
@A=number
P0873832 Issue 05