Table of Contents
Advertisement
42 AT commands
Set S-Register
Result Codes
Query S-Register
Result Codes
CTA 500 dm On Line Guide
The Set S-Register Command
instructs the CTA 500dm to set the speciÞed S-register to a value.
The register number must be speciÞed. An unspeciÞed value causes
the register to have a default setting and an initial factory value.
OK Appears when the command is successfully completed.
ERROR Appears when the chosen register or the value for the
register is invalid.
The Query S-Register Command
instructs the CTA 500dm to return the value of the selected S-
register.
OK Appears on a new line following display of the S-register value.
ERROR Appears when the chosen register is invalid.
Sregister number=[value]
Sregister number?
P0873832 Issue 05
Advertisement
Table of Contents
