Table of Contents
Advertisement
MP
MP command summary
Rate Multiplier
Result Codes
CTI MUX Mode
P0873832 Issue 05
The following command is available for CTA 500dm versions that
support MP.
Command
Description
@B0=n
set number of links
in MP bundle
The Rate Multiplier Command
controls the number of links used when the CTA 500dm is operating
in the MP mode.
A value of 1 indicates that a single link may be used. A value of 2
indicates that two links may be used. The default value is 2.
OK Appears when the value is supported.
ERROR Appears when the selected value is not recognized or is not
supported.
The CTI MUX mode command
activates the ACCESS multiplexer functionality on the CTA 500dm.
Automatically issued when ACCESS/TAPI is being installed on the
PC using the CTA 500dm.
Value
1 single channel used
2 both channels used (default)
@B0=value
ATCTI
CTA 500 dm On Line Guide
AT commands 53
Advertisement
Table of Contents
