Nortel CTA 500dm Installation Manual page 39

Save Dial String
Result Codes
Display Saved Dial String
Result Codes
P0873832 Issue 05
The Save Dial String Command
stores dial strings. The value indicates the location of the dial string
(0-9). If no location is speciÞed, the default location (0) is used.
The maximum length of the dial string is 20 characters. There can be
a maximum of 10 stored dial strings. Saved dial strings are not part
of proÞles.
OK Appears when the command was successfully completed.
ERROR Appears when the command could not be completed.
The display Saved Dial String Command
returns the string stored in the speciÞed location.
The OK indication is returned on a new line following the successful
completion of the command. If no location is speciÞed, a blank line
is followed by the OK indication, and the dial string in location 0 is
returned.
OK Appears following successful display of the stored dial string.
ERROR Appears when the location number was incorrectly
speciÞed.
&Z[value=]dial string
&Z[value]?
CTA 500 dm On Line Guide
AT commands 39