Table of Contents
Advertisement
24 Resource sharing
Installing Dial-Up Server
Allowing access to your PC
CTA 500 dm On Line Guide
If you use your PC to dial into other PCs, enable NetBEUI in the
Server Types window. If other PCs will be dialling into your PC,
enable IP, IPX and NetBEUI.
1. Install Dial-Up Server from either the Plus! Pack or the ISDN
Accelerator Pack.
2. Open My Computer.
3. Open Dial-Up Networking.
4. From the Connections menu, select Dial-Up Server.
5. Select Allow caller access.
6. Select Change Password to apply a password to the connection.
A password is recommended but is not mandatory when using
Dial-Up Server.
7. Information that is entered in the Comment Þeld is displayed to
other PCs that attempt to dial in to your PC.
8. Click Apply.
The Status changes to Monitoring. When another PC dials in, the
Status changes to Answering. Once a connection is established
the guest PCÕs login name is shown.
1. Open My Computer.
2. Open the Control Panel.
3. Open Network.
4. Select the IdentiÞcation tab.
P0873832 Issue 05
Advertisement
Table of Contents
