Table of Contents
Advertisement
52 AT commands
TCM Ports Protocol Selection
TCM Port Protocol Selection Command
Rate Adaptation Protocol Selection
Result Codes
CTA 500 dm On Line Guide
The TCM Port Protocol Selection Command controls use of the
TCM port of the CTA 500dm. Stored values are part of the
CTA 500dm proÞles.
Command
Description
%A2=n
select rate adaptation
protocol
The Rate Adaptation Protocol Selection Command
instructs the CTA 500dm to use the speciÞed protocol for data
transmission using the TCM port of the CTA 500dm.
Character
95
96
OK Appears when the selected protocol is supported.
ERROR Appears when the selected value is not recognized or is not
supported.
Value
95 PPP async-to-sync conversion
96 MP
%A2=value
Use
PPP async-to-sync conversion
MP
P0873832 Issue 05
Advertisement
Table of Contents
