Viessmann VITOLADENS 300-W Installation And Service Instructions Manual page 58

Code 1
Boiler
(cont.)
Coding in the delivered condition
Service status
24:0 "Service" not shown on
display
Filling/Venting
2F:0 Venting program/fill pro-
gram disabled
DHW
Coding
Coding in the delivered condition
Set DHW temperature reheating suppression
67:40 For solar DHW heating:
Set DHW temperature
40 °C. Reheating is sup-
pressed above the selec-
ted set temperature.
Enable DHW circulation pump
73:0 DHW circulation pump:
"ON" according to time
program
58
Possible change
24:1 "Service" is shown on dis-
play (the address is auto-
matically set and must be
manually reset after a serv-
ice has been carried out)
2F:1 Venting program enabled
2F:2 Fill program enabled
Possible change
67:0 Set DHW temperature ad-
to justable from 0 to 95 °C
67:95 (limited by boiler-specific
parameters).
73:1 "ON" from once per hour
to for 5 min up to 6 times per
73:6 hour for 5 min during the
time program
73:7 Constantly "ON"