2.5 Securing and connecting the connection modules
Securing the connection modules
Fault tolerant
Before carrying out any connections, check that the battery circuit breaker
electrical power cord to the AC-power source is disconnected.
Insert the connection module in the connector
1. Secure the connection module to the UPS using
10
the two screws
31
31
Connection of equipment:
1. Connect the protected equipment directly to the outlets
2
Connection to the AC-power source
1
1. Connect the electrical power cord
29
for connection to AC-power source.
2. Connect the other end of the electrical power cord
to an AC-power outlet.
2. Installation
.
31
is OFF and that the
8
to the socket
29
.
10
.
2
1
- Page 15
5103321100/AA