Replacing The Flat Free Tires On The Wheel Rim; Removing/Installing The Shrouds; Removing; Installing - Invacare Pronto M91 User Manual

Power wheelchair base with surestep
Hide thumbs Also See for Pronto M91:
Table of Contents

Advertisement

11 SETUP/MAINTENANCE
New batteries MUST be fully charged before using, otherwise the life of the batteries will be reduced.
10. If necessary, charge the battery. Refer to Charging Batteries on page 64.

11.8 Replacing the Flat Free Tires on the Wheel Rim

WARNING
DO NOT attempt to replace flat free tires. This procedure MUST be performed by a qualified technician.
During initial use of the wheelchair, the user may experience flat spots on the wheels. Flat spots will vanish with continued
use of the wheelchair.

11.9 Removing/Installing the Shrouds

For this procedure, refer to FIGURE 4 on page 101.

Removing

1.
Perform one of the following:
Wheelchairs with Formula PTO Plus - Tilt the seat back. Refer to Tilting the Seat Assembly on page 71.
Wheelchairs without Formula PTO Plus - Remove the seat assembly. Refer to Removing/Installing the Seat Assembly on page 69.
2.
Perform one of the following:
Top Shroud - Lift up on rear edge of top shroud to release the four hook and loop strips that secure the top shroud to the base frame
(Detail "A").
Front Shroud - Turn release knob ¼-turn to the unlocked position and lift up to remove front shroud from base frame hooks (Detail "B").

Installing

1.
Perform one of the following:
Invacare® Pronto® M91™
100
Part No 1143153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents