Depth - Invacare Pronto M91 User Manual

Depth


For this procedure, refer to FIGURE 7.
1. Remove the quick release pin that secures the footboard assembly
to the wheelchair frame.
WARNING
Make sure the detent balls of the quick release pin
are fully released and protruding past the outer
edge of the tube before operating the wheelchair.
Otherwise, injury and/or damage may result.
Keep detent balls clean.
2. Adjust footboard to one of three mounting positions.
3. Install the quick release pin. Make sure the detent balls of the quick
release pin are fully released and past the outer edge of the tube
(Detail "A").
Part No 1143153
Wheelchair
Frame
Mounting
Hole
Three Depth
Adjustment
Holes
Quick
Detent
Release Pin
Ball
DETAIL "A" - BOTTOM VIEW OF FOOTBOARD
Quick Release Pin
Outer Edge of
Tube
FIGURE 7 Adjusting the Footboard Assembly - Depth
105
11 SETUP/MAINTENANCE
Footboard
Assembly
Detent Balls
Invacare® Pronto® M91™