11 SETUP/MAINTENANCE
11.15 Disconnecting/Connecting the Joysticks
For this procedure, refer to FIGURE 12.
The joystick connector is located at the rear of the seat frame.
SPJ+ Joysticks
Disconnecting
1.
Hold the light GREY collar portion of the joystick connector with one hand and the controller connector on the wheelchair in the other and
disconnect them by pulling them apart.
Connecting
WARNING
The joystick connector and controller connector
fit together in one way only. DO NOT force them
together.
1.
Hold the light GREY collar portion of the joystick connector with
one hand and the controller connector on the wheelchair in the
other and align them.
2.
Lightly push to engage the joystick connector and the controller
connector.
Invacare® Pronto® M91™
Light Grey
Collar
Joystick Connector
FIGURE 12
Disconnecting/Connecting the Joysticks - SPJ+ Joysticks
110
Controller
Connector
Part No 1143153