Setup/Maintenance; Setup/Delivery Inspection - Invacare Pronto M91 User Manual

11 SETUP/MAINTENANCE

11 Setup/Maintenance
WARNING
After any adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely -
otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off switch on the joystick is in the Off position.

11.1 Setup/Delivery Inspection

 Setup/delivery inspection should be performed by dealer at time of delivery/set up.
Initial adjustments should be made to suit your personal body structure needs and preference. Thereafter weekly, monthly
and periodic inspections should be performed by user/attendant between the six month service inspections. Refer to User/
Attendant Inspection Checklists on page 85.
Every six months, and as necessary, take your wheelchair to a qualified technician for a thorough inspection and servicing.
Refer to Service Inspection on page 87.
Check all parts for shipping damage. In case of damage, DO NOT use.

Ensure wheelchair rolls straight (no excessive drag or pull to one side).

 Ensure clothing guards are secure
Ensure arms are secure but easy to release and adjustment levers engage properly.

Adjustable height arms operate and lock securely.

 Ensure seat is secured to wheelchair frame and seat release latch is functional. Replace if necessary.
 Ensure axle nut or bolt and wheel mounting nuts are secure on drive wheels.
Ensure casters are free of debris, and all mounting hardware is secure and not damaged/missing.

Check that cables are routed and secured properly to ensure that cables DO NOT become entangled and damaged during normal operation of

seating system.
Invacare® Pronto® M91™
84
Part No 1143153