11 SETUP/MAINTENANCE
5.
Remove the mounting screws and nuts that secure the NEGATIVE (-) BLACK battery cable to the NEGATIVE (-) battery terminal/post as shown
in FIGURE 3.
6.
Set wiring harness aside.
7.
Repeat STEPS 1-6 to disconnect the rear battery from the rear battery harness.
Invacare® Pronto® M91™
NEGATIVE (-)
Battery Cable
NEGATIVE (-)
Battery Terminal
Mounting
Screw
Tie-Wrap
FIGURE 3 Replacing the Batteries and/or Battery Cables
Nut
98
POSITIVE (+) Battery
Cable, Mounting Screw
with Fuse Hardware
Tie-Wrap
POSITIVE (+)
Battery
Battery Terminal
Locknut
Part No 1143153