Table of Contents
Advertisement
15.0 Service History
This section is designed to assist you in keeping a record
of any service and repairs to your wheelchair . Should
you decide to sell or exchange your vehicle in the future,
this will prove most helpful to you. Your Service Agent will
also benefit from a documented record and this manual
should accompany the wheelchair when service or repair
work is carried out. The Service Agent will complete this
section and return the manual to you. All our wheelchairs,
wheelchairs and power wheelchairs undergo rigorous
tests to ensure that they meet our requirements of
comfort, safety and durability.
Our success is based on the strong traditions of quality,
value for money and genuinely caring for our customers.
We pride ourselves not only on designing and building
the most innovative products but also on our commitment
to offer an excellent standard of customer service both
during and after sale.
Fig.15.1
Model
Year
Date
Controller
Horn
On/Off switch
Output plug
Joystick
Brakes
Programme configuration
Batteries
Level
Connections
Discharge level
Wheels
Wear
Pressure
Bearings
Wheel nuts
Motors
Wiring
Connections
Noise
Brakes
Brushes
72
SALSA M
2
Mini
1
2
3
4
Serial No
Year
Date
Chassis
Tightness of All Fasteners
Condition
Steering
Upholstery
Seat
Backrest
Armrests
Electrics
Condition of loom
Connections
Test run
Forwards
Reverse
Emergency stop
Left turn
Right turn
Up/Down slope
Over obstacles
Parking brake
Note: Only use Sunrise Medical parts for service and
repairs
1
2
3
4
Rev.1.0
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Salsa M2 Mini and is the answer not in the manual?
Questions and answers
n you please advise
Connecting VR2 with 2 actuators to Salsa Mini M2. Please advise how to replace.
To connect the VR2 control with 2 actuators to the Quickie Salsa M2 Mini:
1. Ensure the VR2 control system is programmed for actuator operation.
2. Use the actuator button on the VR2 control panel to operate the actuators.
3. Each actuator function (e.g., seat lift or tilt) must be assigned to the actuator button.
4. You can reverse actuator direction relative to joystick movement if needed.
5. If no actuators are programmed, the actuator button has no function.
Make sure the control system is correctly set for the desired actuator functions.
This answer is automatically generated