Table of Contents
Advertisement
DANGER
!
•
Always make sure that the lap strap is correctly
secured and adjusted prior to use.
•
Too loose a strap could cause the user to slip down
and cause serious injury.
•
Check lap strap and securing components at
regular intervals for any signs of fray or damage.
Replace if necessary
•
When servicing, check for correct operation of the
release buckle and for any signs of wear on the
material or plastic brackets.
•
Lap straps are not suitable for transit purposes,
approved occupant restraint systems must be used.
Fig. 4.14
Fig. 4.15
Rev.1.0
Fig. 4.16
Fig. 4.17
Fig. 4.18
Fig. 4.19
Fig. 4.20
SALSA M
17
2
Mini
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Salsa M2 Mini and is the answer not in the manual?
Questions and answers
n you please advise
Connecting VR2 with 2 actuators to Salsa Mini M2. Please advise how to replace.
To connect the VR2 control with 2 actuators to the Quickie Salsa M2 Mini:
1. Ensure the VR2 control system is programmed for actuator operation.
2. Use the actuator button on the VR2 control panel to operate the actuators.
3. Each actuator function (e.g., seat lift or tilt) must be assigned to the actuator button.
4. You can reverse actuator direction relative to joystick movement if needed.
5. If no actuators are programmed, the actuator button has no function.
Make sure the control system is correctly set for the desired actuator functions.
This answer is automatically generated